Pipe and Profile Crusher

The pipe crushing machine is uniquely designed with a circular pipe feeding port for pipe material crushing, which facilitates the feeding and crushing of long-length pipes and improves work efficiency. This pipe crusher with a specialized circular inlet is optimized for long pipe crushing, enhancing operational productivity effectively.It can be optionally equipped with a suction fan and a storage barrel to form a pipe crushing and recycling system, which can give full play to the recycling efficiency. Optional accessories like a material suction fan and storage bucket can be added to form a complete pipe crushing and recycling system, maximizing the recycling performance for industrial use.

This machine is a waste plastic recycling equipment, suitable for crushing and granulating waste and defective injection gates of engineering plastics, as well as various thermoplastics and rubbers. As a professional waste plastic recycling machine, it is applicable for crushing and granulating waste/defective engineering plastic injection sprues, along with all types of thermoplastics and rubbers.This machine is not suitable for crushing various soft plastics and foam plastics. Note that this crusher is not designed for crushing soft plastics or foam plastics.

Product Applications:

It is mainly suitable for crushing various plastic profiles and pipes; for longer plastic pipes, there is no need for cutting and segmenting, and continuous feeding can be achieved at one time. Mainly used for crushing various plastic profiles and pipes; long plastic pipes can be fed continuously without pre-cutting, saving time and labor in the production process.Such as plastic doors, plastic pipes, plastic plates, window frames, wire troughs, sheets, etc. Examples include plastic doors, plastic pipes, plastic sheets, window frames, cable trays, and plastic panels.

This model can realize automatic feeding; the entire pipe is put into the machine and crushed automatically. This pipe crusher model enables automatic feeding—whole pipes are fed into the machine and crushed completely without manual intervention.It is equipped with a fan device for conveying crushed materials; qualified crushed granules are extracted from the machine by a suction fan, facilitating bagging and warehousing. Equipped with a fan-based crushed material conveying system, qualified granules are sucked out of the machine by a suction fan, making bagging and storage convenient for factory operations.It is equipped with an opening device, and the large-sized SWP model is equipped with an independent electrical box control cabinet. It comes with an easy-opening mechanism, and large SWP series models are furnished with an independent electrical control cabinet for safe and convenient operation.It is extremely convenient to operate and maintain, and is an ideal model for crushing various pipes and profiles. With easy operation and maintenance, it is an ideal crusher for various pipes and plastic profiles in industrial settings.The wearing part of the crusher is the blade, which will inevitably wear out after long-term use. The blade is the wearing part of the crusher, and it will wear over extended use—regular inspection is recommended.We usually use 9CrSi alloy steel blades; compared with ordinary materials, they have stronger wear resistance and impact resistance, and after long-term use, the blunt blade edges can be sharpened and reused, greatly reducing costs. We usually equip it with 9CrSi alloy steel blades, which offer better wear resistance and impact resistance than ordinary materials. Blunt edges can be sharpened for repeated use, significantly reducing replacement costs for manufacturers.According to different customer requirements, imported blades can also be equipped to better improve the machine performance. Customization options are available—imported blades can be equipped upon customer request to further enhance the crusher's performance for specific production needs.

Maintenance:

• The pipe crusher should be placed in a well-ventilated location to ensure the heat dissipation of the motor and extend its service life. 1. Install the pipe crusher in a well-ventilated area to ensure effective heat dissipation of the motor, prolonging the motor's service life for long-term use.
• Lubricating oil should be regularly added to the bearings to ensure lubrication between the bearings.
• Regularly check the blade screws, fasten the screws of the moving blade and fixed blade with tools, and strengthen the fixation between the blades and the tool holder. 3. Regularly inspect blade screws; use tools to fasten the screws of moving and fixed blades to enhance the stability between blades and the tool holder.
• To ensure the sharpness of the blade cut, the blades should be checked frequently to maintain their sharpness, reducing unnecessary damage to other components caused by blunt blade edges. 4. Frequently inspect the blades to maintain their cutting sharpness, avoiding unnecessary damage to other parts due to blunt edges.
• When replacing the blades, the gap between the moving blade and the fixed blade is preferably 0.8mm for crushers above 20HP, and 0.5mm for crushers below 20HP. The thinner the recycled material, the appropriately larger the gap can be adjusted. 5. When replacing blades, the optimal gap between moving and fixed blades is 0.8mm for crushers ≥20HP and 0.5mm for crushers <20HP. For thinner recycled materials, the gap can be adjusted slightly larger.
• Before restarting the machine, the remaining crushed materials in the machine chamber should be cleared first to reduce the starting resistance. The inertia cover and pulley cover should be opened regularly to clean the ash outlet under the flange, as the powder discharged from the crusher chamber may enter the rotating shaft bearing. 6. Before restarting, clear residual crushed materials in the machine chamber to reduce starting resistance. Regularly open the inertia cover and pulley cover to clean the ash outlet under the flange—preventing powder from the crusher chamber from entering the rotating shaft bearing.
• The machine should be well grounded. 7. Ensure the machine is properly grounded to ensure safe operation in industrial environments.
• Regularly check whether the crusher belt is loose and tighten it in time. 8. Regularly inspect the crusher belt for slack and tighten it promptly to maintain stable machine performance.