Bounce Screen
- 1.Efficient Screening: The screen plate is made of wear - resistant steel, and the unique screen hole design improves the screening efficiency.
- 2.Reliable Transmission: The detachable eccentric transmission mechanism has a novel structure, reliable transmission performance and convenient replacement.
- 3.Energy - saving Speed Regulation: The motor adopts a frequency conversion control system, which can realize efficient and energy - saving operation. In addition, the frequency conversion control of the reduction motor combined with the adjustment of the screen plate angle can adapt to the screening of various materials.
- 4.Convenient Adjustment: The inclination angle of the box body is controlled by the hydraulic system, which is convenient to adjust and has a large adjustment range, ranging from 12 degrees to 20 degrees.
- 5.Durable: The box body is made of profile welding, the lining plate is made of wear - resistant steel plate, so the equipment is solid and suitable for continuous operation; the machine screen plate is composed of multiple wear - resistant steel screen plates.
- 6.Flexible Design: The screen holes are round or square, which can be determined according to the actual materials.
Overview
The bounce screen, also known as ballistic screen, 3D bounce screen, etc., is a new - type screen machine specially developed for garbage sorting and treatment.It sorts materials based on the differences in size, density and shape of different components in the sorted materials, and can screen garbage into 3D materials (heavier and rollable materials, such as plastic bottles, wood, cans, etc.), 2D materials (lighter and flaky materials, such as plastic films, paper, cartons, etc.) and fine substances (undersize materials, such as sand, organic matter, etc.).It is widely used in the sorting of domestic waste, construction waste, pressed kitchen waste, paper recycling and other industries.
Working Principle:
Under the action of the driving motor, the bounce screen is connected with the support base and the screen plate through the active - passive transmission mechanism composed of the driving shaft, driven shaft, eccentric wheel (or crankshaft gear, chain and other transmission devices) to form a parallel four - bar mechanism, which makes the screen plate produce a reciprocating circular motion similar to bouncing.The materials input from the feed port are scattered during the movement of the screen plate, and separated into 3D materials, 2D materials and undersize materials according to factors such as particle size, rebound effect and weight, which are respectively received by three discharge hoppers.In addition, the angle between the box body and the screen plate can be adjusted through the hydraulic jacking system to change the bounce lifting angle of the sorted materials, so as to adapt to the climbing ability and bounce performance of different materials.
Application Scope:
- 1.Garbage Treatment Centers: Domestic waste sorting and treatment centers use bounce screens for the screening and separation of granular materials to realize the classification treatment of different types of garbage; construction and decoration waste resource treatment centers can conduct front - end pre - sorting of construction and decoration waste.
- 2.Sorting Centers: Sorting centers after domestic waste classification further conduct detailed screening of garbage.
- 3.Pre - incineration Treatment: It is used for the reduction treatment of garbage before incineration in pyrolysis gasification furnaces, separating combustibles and incombustibles, improving incineration efficiency and reducing the impact on the environment; it can also be used for the sorting of light materials in garbage incineration slag.
- 4.Other Industries: It is used for material sorting in industries such as pressed kitchen waste and paper recycling
Maintenance:
- 1.Control the size and weight of the feed material to avoid the entry of excessively large and heavy materials, so as to prevent damage to the screen plate and affect the sorting effect;
- 2.It cannot be used for the sorting of large - sized brick and stone construction waste and large - sized solid waste, and such materials need to be pre - picked out before sorting;
- 3.It cannot be used for the sorting of strong acid and strong alkaline materials to avoid corrosion of the equipment;Regularly inspect components such as the eccentric transmission mechanism, screen plate and hydraulic system, and replace them in time if there is wear or damage;
- 4.Carry out regular maintenance on equipment such as motors and reduction motors to ensure their normal operation.
Technical Parameters
Technical Parameters
| Model | Number Of Platforms (units) | Sieve Plate Width (mm) | Sieve Plate Length (mm) | Processing cCapacity (m³/h) | Sieve Hole Size (mm) | Power (KW) |
| TT1745 | 4 | 400 | 4500 | 10-30 | 5-50 | 22 |
| TT2145 | 5 | 400 | 4500 | 15-30 | 5-50 | 22 |
| TT2155 | 5 | 400 | 5500 | 15-40 | 5-50 | 22 |
| TT2555 | 6 | 400 | 5500 | 20-50 | 5-50 | 30 |
Your requirements are the basis for our development and a daily challenge to bring to fruition, please do not hesitate to inquiry us.
Disc Screen
- 1.Large processing capacity: The processing capacity of the disc screen is 4 times that of the traditional drum screen of the same size. This large processing capacity makes the disc screen more suitable for large - scale material processing scenarios.
- 2.High screening efficiency: The screening efficiency of the disc screen is 1.5 - 2 times that of the drum screen. High screening efficiency can save a lot of time and cost for users in material processing.
- 3.Flexible adjustment: The screen holes of the disc screen can be adjusted at will and can also be customized. It adopts frequency conversion stepless speed change control, so the processing capacity can be adjusted according to needs. This flexible adjustment feature makes the disc screen applicable to various material processing requirements.
- 4.Low energy consumption: The disc screen adopts frequency conversion adjustment technology, so it has low energy consumption. Low energy consumption can help users reduce operating costs, which is a major advantage of the disc screen.
- 5.Reasonable design: The disc screen adopts hexagonal arc disc modular design, which is convenient for selecting the appropriate number of modules and easy to maintain. The special disc design makes the dynamic screen hole accuracy higher. The reasonable design of the disc screen improves its usability and reliability.
- 6.Stable operation: The disc screen selects wear - resistant sprocket chains, adopts chain linkage and a unique tension chain design, so it operates more stably. Some disc screen equipment can also work stably for a long time under heavy load. Stable operation ensures the continuous progress of material processing work.
- 7.High safety performance: Some disc screen equipment is equipped with an overload protection device, which can automatically cut off the motor power supply when the roller is stuck. It also adopts frequency conversion stepless speed change control, so it has high safety performance. High safety performance can ensure the safety of operators and equipment.
- 8.Not easy to block holes: The screen body of the disc screen is equipped with a cleaning device, or the screen holes rotate continuously, so it is not easy to be blocked. This feature of not being easy to block holes reduces the frequency of equipment maintenance and improves work efficiency.
- 9.Small floor area: Compared with traditional screening equipment, the disc screen has a smaller floor area. The small floor area is convenient for users to arrange the equipment in the workshop, saving workshop space.
- 10.Low investment cost: The special structural design of the disc screen reduces the investment cost. Low investment cost makes the disc screen more cost - effective, which is a great attraction for users who need to purchase screening equipment.