HDPE Pipe Extrusion Line

• Applicable Products: HDPE Pipe, PE Pipe, PE Pipe, PP Pipe, PB Pipe,PERT Pipe,ABS Pipe, etc.
• Applicable Materials: HDPE, PE, PP, PB, PERT, ABS, etc.
• Alias: HDPE gas and water supply pipe extrusion line, HDPE pipe production line, HDPE pipe making machine, HDPE pipe machine, HDPE pipe line, HDPE pipe extruder

The complete HDPE Pipe Extrusion Line consists:

1. Feeder
   Used for feeding the material to the extruder, generally speaking, people like to use vaccum feeder for feeding the pellets.
2. Single Screw Extruder
   Generally speaking, two single screw extruders are needed, the big extruder is used to extrude the pipes while the other small one is used to extrude the mark line. The most important part of the whole extrusion line, the life time of the entire extrusion line depends on the quality of the extruder. Audop always provides the best quality extruder to customers.
3. Mould(Die Head)
   The core part of the pipe extrusion line, the quality of the pipe mostly depends on the qualtiy of the mould.
4. Vaccum Calibrating and Cooling Tanks
   Good vaccum calibrating and cooling tank makes the pipe looks nice, more than one set of vaccum calibrating and cooling tank will be needed for making big diameter pipe.
5. Water Cooling Tanks
   Pipe comes from mould is hot, it is still very hot even after cooling by the vaccum calibrating and cooling tank, so the water cooling tank is needed for cooling the pipe. Generally speaking, the bigger diameter need the longer water tank.
6. Haul-off unit
   Haul-off unit is a device which pull the pipe goes forward. There are serveral different models which are sorted by the quantity of the claw(caterpillar).
7. Cutter
   The cutter of the HDPE pipe extrusion line is automatic and digital controlled, which is world leading. Its operation is easy while its performance is excellent and stable
8. Winder or Stacker
   For collecting the pipes.

This HDPE Pipe Extrusion Line is mainly used in the manufacturing of the HDPE pipes with various diameters(16mm-1600mm) and wall thickness in the aspects such as the water supply and gas supply. This pipe extrusion line is also widely used in making double-anti(anti-flammable, anti static electricity)pipe or mine industries. The modern developed 2-layer or 3-layer spiral mould is specially for double-anti pipe extrusion. This pipe owns even and equal co-extrusion wall thickness, the inner and outer wall made of double-anti material (Anti-flammable, anti static electricity), the core layer of HDPE wall, reasonably reduce the costs of double-anti material, accordingly reduced the costs of the whole product. According to customers requirement, this HDPE pipe extrusion line also suitable to produce some other kinds of pipes by changing and/or adding special devices.

HDPE pipes produced by Audop's HDPE pipe extrusion line are featured with excellent stiffness and flexibility, heat resistance, aging resistance, high mechanical strength, resistance of environmental stress cracks, resistance to creep deformation, heat-linkage, and so on.As it is a ideal gas and water pipe for ductwork system between city and its suburb, large diameter HDPE pipes start to play very important role in the city water and gas supply systems.

Audop supplies all the HDPE pipe extrusion line and corresponding auxiliary machines or systems to meet your business demands. You get the freedom to build your extrusion line around the system components that meet your exact requirements. All subsystem and support equipment such as feeding device, dies, control panels, etc may be included to provide a total system concept. The end result is superior quality, highly reliable machines that turn products into bigger profits for you.

While the above may sound similar to other suppliers, we can assure you that the specific execution that we utilize is dramatically better. Upon request we can provide further specifics of our unique and proprietary approaches, on-going continuous improvements.