Plastic Hopper Dryer Machine
- Adopting hot air diffuserdevice with high performance.
- Adopt special bend design of hot-blast.
- Inner hopper and all the internal parts are med of stainless steel.
- Separated design of the pail and the bottom of Hopper.
- Adopt proportional deviation indication thermostat.
- Adopt double overheating protection.
- 0-99 hour timing automatic starting the machine.
Overview
Plastic Hopper Dryer Machine
Area of application:
Plastic industry, Rubber industry, Pharmacy, Extrusion industry, Plastic processing factory, Chemical industry, Food service industry
Materials that can be processed:
PP, HDPE, LDPE, LLDPE, TPV, EVA, ABS, PS resin, Rubbers, Films, etc.
Application:
Used for drying the plastic material. It can dry the wet material for package, transportation of recycle.
Advantages:
- Keep the plastic dry evenly and increase the dry efficiency.
- Avoid the accumulation of dust at the bottom of the tubular electric heating element and also avoids the fire.
- The product will not be contaminated by.
- It is convenient to clear and changing material.
- Control the temperature accurately.
- Avoid the accidents caused by people or machine.
- Intermittent drying way to save power.
Overview:
AUDOP Plastic hopper dryer are quick-drying equipment for non-hygroscopic plastics and rubber. They can dry the humidified raw material caused by packing, transportation and retrieving. The hopper dryer is best to be directly installed on the plastics or rubber molding machine. It is quick to install and it can save space. For all types of the equipment, the 24-hrs timer is available as option.
Intergrant:
1. Even Heat Distribution:
High efficiency to save lots of drying time required.
2. Advanced Product Output and Quality.
The melting time of the material can be shortened and the ejecting rate of it can be increased. After being dried, the products can be apparently improved in their brightness.
3. Quick Heating Speed.
High efficiency in heating and swift hear displacement sharply reduce the time required for drying.
4. Precise Temperature Control:
It applies high precision temperature controller ensure a small temperature-control error. It is equipped with over-heating protection device to avoid the accident caused by man or improper operation of machine.
Any questions to Plastic Hopper Dryer Machine please feel free to contact with us!
Technical Parameters
Technical Parameters
| Model | Volume | Capacity(kg) | Power(kw) | Dimension(mm) L× W× H | Weight(kg) | Capacity of molding Machine fitted for | |
| Heater | Fan | ||||||
| STG-U8 | 8 | 5 | 1.2 | 0.04 | 560×240×850 | 22 | 5-30 |
| STG-U16 | 16 | 10 | 1.4 | 0.06 | 620×280×920 | 28 | 30-60 |
| STG-U20 | 20 | 12 | 1.6 | 0.06 | 690×300×1000 | 30 | 60-125 |
| STG-U25 | 25 | 15 | 1.8 | 0.06 | 705×320×1015 | 32 | 60-125 |
| STG-U40 | 40 | 25 | 2.6 | 0.06 | 800×370×1015 | 50 | 125-250 |
| STG-U80 | 80 | 50 | 3.9 | 0.12 | 850×460×1100 | 60 | 250-500 |
| STG-U125 | 125 | 75 | 4.8 | 0.12 | 950×530×1200 | 75 | 500-1000 |
| STG-U160 | 160 | 100 | 5.4 | 0.25 | 1650×650×1650 | 90 | 1000-2000 |
| STG-U250 | 250 | 150 | 9 | 0.37 | 1720×720×1950 | 110 | 2000-3000 |
| STG-U315 | 315 | 200 | 12 | 0.37 | 1800×800×1950 | 135 | 3000-4000 |
| STG-U400 | 400 | 250 | 15 | 0.55 | 1800×800×1950 | 200 | 3000-6300 |
| STG-U500 | 500 | 300 | 18 | 0.55 | 2000×850×2200 | 240 | 4000-10000 |
| STG-U800 | 800 | 500 | 24 | 0.75 | 2200×1100×2400 | 300 | 6300-12500 |
| STG-U1250 | 1250 | 800 | 36 | 1.1 | 2725×1200×3425 | 500 | 12500-15000 |
| STG-U1500 | 1500 | 100 | 48 | 1.1 | 2825×1300×3725 | 600 | 15000-20000 |
Your requirements are the basis for our development and a daily challenge to bring to fruition, please do not hesitate to inquiry us.
Vertical Mixer Dryer
- The machine occupies a small area, has low energy consumption, large capacity, saves labor, is easy to operate, saves time and effort, and has a fast and uniform mixing effect. It adopts spiral stirring for feeding, which is convenient for feeding. Workers can feed materials directly standing on the ground (or use a fan to directly send plastic granules into the barrel from the pelletizer).
- Vertical design, easy to operate and maintain.
- The parts in contact with raw materials are made of stainless steel, which is easy to clean and avoids rusting.
- Synchronous stirring and drying. During the drying process of materials, they keep flowing continuously, so that heat penetrates evenly, the drying time is short and the materials are not easy to agglomerate.
- The heating type machine integrates drying and mixing functions. When drying is not needed, it can be used for plastic stirring and homogenization by simply turning off the heating switch and fan switch, realizing one machine with two uses.
- It is equipped with protection devices and functions such as automatic operation timing, overload protection and feeding limit alarm.
- It can be widely used for stirring and homogenizing plastic sheets, crushed materials, powder materials, plastic granules, new and old plastic materials, and materials with added color masterbatches, etc.