TD Bucket Elevator
More Pictures
Features
- Small driving power, adopting inflow feeding and induced discharge.
- The dense arrangement of large-capacity hoppers ensures that there is almost no material return and digging during material lifting, so the ineffective power is low.
- It has a wide lifting range and has few requirements on the type and characteristics of materials. It can not only lift general powder and small granular materials, but also lift materials with high abrasiveness. It has good sealing performance and causes little environmental pollution.
- It operates reliably. Advanced design principles and processing methods ensure the reliable operation of the whole machine, with good trouble-free operation performance.
- It has a high lifting degree, and the elevator runs stably, so it can reach a relatively high lifting height.
- It has a long service life. The elevator adopts the inflow method for feeding, without the need to dig materials with hoppers, so there is little extrusion and collision between materials.During the design process, it is ensured that there is little material scattering during feeding and unloading, which reduces mechanical wear.
- It can lift all conventional materials. For ordinary rubber belts, the temperature shall not exceed 60?. If heat-resistant rubber belts are used, the temperature can reach 200?.
Overview
The TD bucket elevator is a new-type bucket elevator designed and developed based on the D-type bucket elevator. Compared with the D-type bucket elevator, the TD-type bucket elevator has the advantages of large lifting capacity, high lifting height, stable and reliable operation, and long service life.This series of bucket elevators is also equipped with four hoppers of different specifications, namely Q-type (shallow hopper), H-type (arc-bottom hopper), ZD-type (medium-deep hopper) and SD-type (deep hopper). Users can make a selection according to the characteristics of the materials to be conveyed.
TD/D type bucket elevators are mainly applied in industries such as food, chemical engineering and construction. They are suitable for conveying non-abrasive or semi-abrasive materials in powder, granular and small block forms, such as grain, coal, cement, crushed ore, sand, coke breeze and so on.
The TD-type bucket elevator adopts a rubber conveyor belt as the traction component and uses the scooping method to complete the loading of materials.The loading inlet is set at the tail of the equipment, which is more conducive to the loading and conveying of materials.After the materials are put into the bottom of the elevator through the feed inlet, the hoppers (i.e., buckets) are pulled by the conveyor belt to carry the materials and run upward at a constant speed. When the hoppers loaded with materials run to the top, they unload materials in a centrifugal or mixed way, so as to complete the lifting and conveying of materials.
Technical Parameters
Technical Parameters
| Model | TD100 | TD160 | TD250 | TD315 | TD400 | TD500 | TD630 | |||||||||
| Hopper Type | Q | H | Zd | Sd | Zd | Sd | Zd | Sd | Zd | Sd | Zd | Sd | Zd | Sd | ||
| Delivery Capacity(m³/h) | Centrifugal | 4 | 7 | 16 | 27 | 38 | 59 | 42 | 67 | 68 | 110 | 96 | 154 | 148 | 238 | |
| Mixed | / | / | / | / | / | / | 32 | 50 | 54 | 85 | 70 | 112 | 110 | 218 | ||
| Hopper | Width(mm) | 100 | 160 | 250 | 315 | 400 | 500 | 630 | ||||||||
| Volume(L) | 0.15 | 0.3 | 1.2 | 1.9 | 3.0 | 4.6 | 3.75 | 5.8 | 5.0 | 9.4 | 9.3 | 14.9 | 14.6 | 23.5 | ||
| Distance(mm) | 200 | 350 | 450 | 500 | 560 | 625 | 710 | |||||||||
| Delivery Capacity(m³/h) | Width(mm) | 150 | 200 | 300 | 400 | 500 | 600 | 700 | ||||||||
| Layers (Maximum) | 3 | 4 | 5 | 6 | ||||||||||||
| Drive roller diameter(mm) | 400 | 500 | 630 | 800 | ||||||||||||
| Driven roller diameter(mm) | 315 | 500 | 630 | 630 | ||||||||||||
| Hopper Running Speed(m/s) | Centrifugal | 1.4 | 1.6 | 1.8 | 2.0 | |||||||||||
| Mixed | / | / | 1.2 | 1.4 | 1.3 | 1.5 | ||||||||||
| Spindle Speed（rpm） | Centrifugal | 67 | 61 | 54.6 | 48 | |||||||||||
| Mixed | / | / | 45.8 | 42.5 | 40 | 36 | ||||||||||
Your requirements are the basis for our development and a daily challenge to bring to fruition, please do not hesitate to inquiry us.
Customers viewing this product may be also interested in:
Spring Feeder
- Easy to install and movable. For example, if multiple mixers use the same material, only one spring feeder can supply materials to multiple mixers at the same time, eliminating the trouble of manual feeding and making the feeding work safer, more time-saving and labor-saving. This movable spring feeder effectively reduces the number of equipment purchases for enterprises.
- Reasonable design, easy operation and maintenance. Compared with vacuum feeders, this spring feeder eliminates the trouble of frequent filter cleaning, reducing the workload of equipment maintenance for production line engineers.
- Adopting advanced electrical control components and motors to ensure safe and reliable operation of the system. The spring feeder has a large conveying capacity, with a maximum feeding capacity of 3 tons per hour, meeting the material supply needs of large-scale production lines.
- Wide application range. This spring feeder can convey powder materials, plastic granular materials, powder-granule mixtures, and can also be used with crushers. It is also suitable for conveying powder and granular materials in the production processes of the pharmaceutical and chemical industries. This wide-application spring feeder is a versatile choice for different industrial scenarios.
- Low energy consumption. Compared with traditional vacuum feeders and spring-type dust feeders, the energy consumption of this spring feeder is only about one-third, helping enterprises reduce energy costs and achieve energy-saving production.
Turn Belt Conveyor
- Flexible adaptation: Supports multi-angle turning (30°, 45°, 90°, 180°), and the inner/outer radius, belt width and frame height can be customized according to needs to meet the layout of narrow spaces or complex assembly lines.
- Stable conveying: The conveyor belt runs stably, with no relative movement between materials and the conveyor belt, which can effectively avoid damage to conveyed items, and is especially suitable for production links with high requirements for material integrity.
- Low noise and energy saving: It has a low noise level, creating a quiet working environment for the workshop, and at the same time, it has low energy consumption, reducing the production and operation costs of enterprises.
- Durable and easy to maintain: It adopts standardized component design, with a simple structure and convenient daily maintenance; it has low energy consumption (power matched according to needs) and obvious advantages in long-term use cost.
- Diverse materials: The conveyor belt has a variety of materials, including PVC, PU, etc., and some can also meet special needs such as oil resistance, corrosion resistance and anti-static, adapting to different materials and working environments.
- Safe and efficient: The design without sharp corners ensures the safety of operators; it supports high-speed conveying (linear speed adjustable from 0 to 50 meters per minute) to meet the needs of large-flow material transmission.
FU Scraper Conveyor
- It is often used for horizontally conveying granular and powdery materials, and can also be used for inclined conveying within an angle range of 150°. The FU scraper conveyor is flexible in material conveying directions.
- It has the characteristics of long overall service life, stable operation, small structural size, large conveying capacity, low energy consumption and low material damage rate. These features make the FU scraper conveyor a cost - effective choice for factories.
- The overall structure is reasonable, allowing multi - point feeding. Driven by the reducer, the scraper moves stably at a low noise level. On the basis of single - point feeding and discharging, it can also realize multi - point feeding and discharging. It has outstanding advantages in conveying toxic, explosive, high - temperature and easy - to - fly materials, improving workers' operating conditions and reducing environmental pollution. The FU scraper conveyor is an excellent choice for environmentally friendly and safe material conveying in industries.
Folding Conveyor
- The folding belt conveyor has a relatively simple structure and is easy to install and maintain.
- The conveyor belt is generally made of rubber material, which has good impact resistance and can withstand a certain degree of impact force.
- The folding belt conveyor can be folded after work, with a small floor space. It is a very ideal material conveying equipment for places with limited space.
- It can replace manual material handling, reduce labor costs, convey materials continuously and has high work efficiency.
U-Type Screw Conveyor
- Imported thickened screw: The thickness is about 6 - 8mm, and it can be thickened according to the wear resistance of the materials. This high - quality screw of U-Type Screw Conveyor ensures long - term stable operation for factory production lines.
- Multiple material options: The casing material includes carbon steel/stainless steel, which allows the U-Type Screw Conveyor to convey a wide range of materials, meeting the diverse needs of different industries for procurement.
- Large conveying capacity: A single U-Type Screw Conveyor can convey materials up to 80 meters, with a conveying capacity of 458 m³ per hour, improving the production efficiency of the factory.
- No material blocking: The discharge port of the U-Type Screw Conveyor is equipped with a cleaning device to ensure no material blocking and more reliable conveying, reducing the maintenance workload for production line engineers.
- No dust raising: The hanging bearing of the U-Type Screw Conveyor adopts a sliding bearing with a dust - proof sealing device, which has a good sealing effect, complying with the environmental protection requirements of the workshop.
- Flexible arrangement: The U-Type Screw Conveyor can realize continuous conveying at horizontal/large angles, applicable to more different application scenarios, providing flexible layout options for factory workshops.
- High - efficiency conveying: The screw body of the U-Type Screw Conveyor is designed with small diameter, high rotation speed and variable screw, ensuring smooth, fast and uniform feeding during the working process, and enhancing the overall production efficiency of the enterprise.
- Diversified connections: The inlet and outlet of the U-Type Screw Conveyor can adopt connection methods such as universal balls, cloth bags and flanges, facilitating the connection with other equipment in the production line for procurement personnel.